Dehumidification machine use and maintenance

 dehumidification machine use and maintenance

Dehumidifier maintenance? Below we teach to teach you how to maintenance the dehumidifier in life

Methods 1 - maintenance dehumidifier dehumidifier through moving the best prior static put four to six hours, and then boot to use, because Guan Xianzhong in dehumidifier compressor containingcold coal, after removed, cold coal must be four to six hours back. Regular cleaning air filter net(about two Monday times), in order to maintain the dehumidification equipment, dust removal efficiency and life. Clean the air filter net in 40 DEG C water washing can be better; cleaning with detergent, washed off the dust after

The water washed clean, dry in the shade after loading back to the machine body. Clean the body,with a damp cloth gently wipe; avoid direct water sprinkling cleaning, so as not to damage theelectrical insulation. The body surface mount, use soap water cleaning, avoid using gasoline,petroleum naphtha, solvent or spray insecticide spraying, to avoid peeling paint or discoloration.Not usable fine rod, wire to cut inside the machine, in order to avoid trouble or danger. A power outage or long-term

And while traveling, please unplug the power line to maintain the life of the machine.

Method 2 - maintenance dehumidifier condenser should always clean, keep clean. Dehumidifiershould be placed in the interior of central position. Dehumidifier air access without obstacles blocking, air filter net should be cleaned. The ambient temperature is lower than 15 DEG C,attached to the surface of the evaporator water droplets will freeze and the dehumidifier effectweakened, if the ambient temperature is more than 40 DEG C, the pressure inside the systemwould be increased when the compressor overload, overload protection device should be cut offline, otherwise it will damage the compressor motor. So the dehumidifier and best use of the temperature range of 5 to 38 DEG C, the microcomputer control type dehumidifier for automatic defrosting function, using temperature range to 5 to 40 DEG C. The air humidity below 30% the following, too dry and uncomfortable, so reliable humidity controller to control, to maintain 50% ~60% range. When using windows as close as possible, make indoor to the dehumidifying effect.Machine

Body be placed flat, not be inclined or horizontal, avoid the machine malfunction or abnormal noise.The dehumidifier in water storage too full, in order to avoid overflow pollution wet ground, but must be in operation handling body, unplug the power line plug, then the storage bucket of water.